- 1. Mirror spark machining should use the specific functions of the control panel and each key, and use the machine flexibly, a well-known conversion screen operation period, especially several important pictures (for example, preparation screen, observation screen) master The state has to prevent various operation panel abnormalities caused by unfamiliar functions of the processing, and the other is easy to be damaged. Because the keys (especially the public key) use high density, when the operation panel is The surface is used as the protective layer of the plastic sheet to extend the life of the operation panel;
- 2. Only people who have been trained in such machines and equipment can use such machines and equipment;
- 3. To prevent long-term overheating of the processing fluid, the cooling system needs to be continuously turned on;
- 4. In order to avoid direct contact with the power cord, the protective door of the machine must be closed;
- 5. At the same time, the same operation is not allowed for 2 machines. When running the operation screen, the screen brightness should be reduced, and the screen should be obliquely observed, thereby reducing the harm to the eyes by radiation;
- 6. Like the operation panel, the processor should also be familiar with the specific purpose of the remote control. The key of the remote control should be protected with a layer of plastic paper. In addition, the reason why the remote control can be operated remotely without an operation panel is that it uses wires for conduction, so the protection of the remote control should also include the protection of the wires. Try not to pull the wire forcefully when using it to prevent the remote control from failing. This part of the wire should be wound into a circle, and after use, it must be put back in place and hung up;
- 7. When the machine tool or machine head is moving, do not place your fingers between the head and the work object, and prevent the direction keys or direction keys from being pressed in the wrong direction, which may cause safety accidents;
- 8. Protection of the processing platform: When processing the workpiece, pay attention to whether the clamping method will cause damage to the processing platform, pay attention to drying the platform when using it, and use anti-rust oil to protect the machine tool when it is not used for a long time.
